Average time per connector in a large batch can be as low as 5 or 6 minutes. Faster curing epoxies such as anaerobic epoxy can reduce the installation time, but fast cure epoxies are not suitable for all connectors.




HOME \| SITE MAP \| ABOUT US \| PRODUCTS \| LITERATURE \| SALES \| HELP

PROMOTIONAL ITEMS

SC/APC-SC/APC Ribbon Fanout Cables, SM 8-fiber, 2mm

Advantages of pre-loaded epoxy connector include no epoxy injection required, no scraped connectors due to epoxy over-fill, reduced equipment requirements for some versions. Connectors that use the internal crimp method install in 2 minutes or less.

High density interconnect replacing 12 connectors
4, 8 and 12 channels available
Designed for single mode or multimode
Ribbons cables or bare ribbon fibers
Easy Push/Pull operation
Save space and cost

Part #	Description	Specifications	Price
JR-SM-8-10-A-SC/APC-2-1.02-B-SC/APC-2-1.02	SC-SC fiber optic ribbon fanout cables, angle polish, 8-core, SM, 2mm furcation tube, jacket ribbon length - 10 meters, fan-out length - 1.02 meter	Fan-out specifications	Phone
JR-SM-8-10.2-A-SC/APC-2-1.03-B-SC/APC-2-1.03	SC-SC fiber optic ribbon fanout cables, angle polish, 8-core, SM, 2mm furcation tube, jacket ribbon length - 10.2 meters, fan-out length - 1.03 meter	Fan-out specifications	Phone
JR-SM-8-10.4-A-SC/APC-2-1.04-B-SC/APC-2-1.04	SC-SC fiber optic ribbon fanout cables, angle polish, 8-core, SM, 2mm furcation tube, jacket ribbon length - 10.4 meters, fan-out length - 1.04 meter	Fan-out specifications	Phone
JR-SM-8-10.6-A-SC/APC-2-1.05-B-SC/APC-2-1.05	SC-SC fiber optic ribbon fanout cables, angle polish, 8-core, SM, 2mm furcation tube, jacket ribbon length - 10.6 meters, fan-out length - 1.05 meter	Fan-out specifications	Phone
PDF Brochure

Other Promotional Item Pages: MAIN, PREV., NEXT
2004 Pacific Interconnections. All rights reserved.	Disclaimer \| Terms & Conditions