By using a ribbon fiber and fan-out assembly, the pre-terminated fiber is fully protected while giving the user more density with less field termination or splicing, leading to less labor and failure rate.




HOME \| SITE MAP \| ABOUT US \| PRODUCTS \| LITERATURE \| SALES \| HELP

PROMOTIONAL ITEMS

MPO-LC Fanout Cord, 8-Fiber, 50um

MPO has no-epoxy housing design. It terminates ribbon fiber or ribbonized individual fibers, It is designed for single-mode, premium single-mode and multimode performance, Ruggedized cable or bare ribbon options available. The high-density design fits into rack mountable cabinets to enable efficient use of room and rapid network deployment.

High density interconnect replacing 12 connectors
4, 8 and 12 channels available
Designed for single mode or multimode
Ribbons cables or bare ribbon fibers
Easy Push/Pull operation
Save space and cost

Part #	Description	Specifications	Price
MPO/F-LC-8-50-0.9-0.3	MPO-LC fanout cord, no pin, 8-fiber, 50um fiber, 900um, 0.3 meter	Spec.	Call us
MPO/M-LC-8-50-0.9-0.3	MPO-LC fanout cord, with pins, 8-fiber, 50um fiber, 900um, 0.3 meter	Spec.	Call us
MPO/F-LC-8-50-0.9-0.5	MPO-LC fanout cord, no pin, 8-fiber, 50um fiber, 900um, 0.5 meter	Spec.	Call us
MPO/M-LC-8-50-0.9-0.5	MPO-LC fanout cord, with pins, 8-fiber, 50um fiber, 900um, 0.5 meter	Spec.	Call us
PDF Brochure

Other Promotional Item Pages: MAIN, PREV., NEXT
2004 Pacific Interconnections. All rights reserved.	Disclaimer \| Terms & Conditions